Board Level

The Endurance® Series from Weiss Technik—the temperature & humidity chamber that stands alone. Designed and engineered to give you lasting value, performance and reliability for all your climate testing applications. The intelligent engineered test space design allows for maximum airflow coverage and accurate gradients. Five popular sizes available that allow you to choose the chamber that best fits your needs, while the mobile design allows for greater flexibility.
Available in both reach-in or cart-based versions, the ESS Series allows highly accelerated product temperature change rates through high air velocity conditioning. Weiss Technik has developed standard models that feature either our patented horizontal or vertical air flow, as different testing needs dictate that different temperature ranges, as well as change rate capabilities be readily available. Weiss Technik will equip your system with single-stage, cascade, twin-screw, LN2 boost, or LN2 cooled refrigeration systems, as well as the powerful Weiss Technik Controller/Programmer—all standard. By utilizing Quick Draw, we ensure that your product reaches set point as quickly as possible to reduce cycle times. Please review the product features below, as well as additional options and industry applications. Contact us for additional information or to request a quote.
The Star Galaxy™ HALT/HASS systems are integrated test chamber/vibration table packages. These chambers are outfitted with a liquid nitrogen (LN2) cooling systems in order to provide the rapid thermal change rates required to achieve maximum product stress. The vibration table is a six degree-of-freedom (6DoF) tri-axial pneumatic vibration table.
The ET27-1-10-WC-HAF test chamber was designed to maximize the testing capabilities for 19" rack mountable networking equipment. It was designed with right-to-left cross-chamber air flow to work with customer product by moving the air in the same direction as current customer-completed chassis designs. This helps to eliminate temperature gradients between upper and lower test tiers found in typical environmental chamber configurations. All chassis are exposed to identical temperature swings, changes, and ramp rates. Additionally, this system was designed with a single stage compressor system for ESS compatible product testing requirements between 0° and 50°C. The ET27-1-10-WC-HAF Test Chamber's small size provides a much more flexible system by allowing more rapid load turn times and less impact during chamber down time for preventive maintenance. The hole pattern in the side walls is characteristic of Techniks' patented high-velocity horizontal air flow system. All external connections typically found on other chamber designs such as water inlet/outlet and dry air purge systems have been moved inboard to protect them from accidental damage. Easy access for interconnect is provided through a 14" x 12" port which is conveniently located in the rear wall.
TWO ZONE, SINGLE CAPACITY (-2) (One hot zone & one cold zone) The products under test travel via a carrier basket, alternating between the hot and cold zones. TWO ZONE, DOUBLE CAPACITY (-2D) (Two hot zones & one cold zone) In the two zone, double capacity system, the cold zone is always in use, which contributes to the efficiency of the system. THREE ZONE, SINGLE CAPACITY (-3) (One hot zone, one ambient zone & one cold zone) In the horizontal three zone, the products travel via a carrier basket between the cold and ambient zones, and the hot zone travels to envelop the carrier basket.
TWO ZONE, SINGLE CAPACITY (-2) (One hot zone & one cold zone) The products under test travel via a vertical lift elevator, alternating between the hot and cold zones. TWO ZONE, DOUBLE CAPACITY (-2D) (Two hot zones & one cold zone) In the two zone, double capacity system, the cold zone is always in use, which contributes to the efficiency of the system.

The WT3-V/WK3-V Weiss Technik testing systems represent the broad performance range of our test systems. These test systems enable you to simulate dynamic processes, mechanical as well as thermal loads, which affect components and equipment. With a total of 36 test cabinets in 3 sizes with volumes of 600, 1200, and 2200 liters, and two temperature ranges from -40 and -70 to 180°C and temperature conditioning performances of 5, 10, and 15 K/min – both with and without climate conditioning.

The Xceed Custom Reach-In Series is the environmental test chamber from Weiss Technik that gives unlimited options. Designed, engineered, and built to your specifications the Xceed Series offers flexible temperature and humidity ranges, sizes that meet your exact testing requirement and available options that provide unmatched product testing applications.
The Xcel Series from Weiss Technik provides temperature and humidity testing with flexibility through intelligent engineering, ergonomic design, broad temperature range and lasting reliability and durability. Available in many standard model configurations that fit most testing applications, the Xcel Series includes standard features that allow for accurate and precise product testing. Optional accessories allow you to customize your testing applications. The easy-access panels allow for easy maintenance. The Xcel Series provides fast change rates and accurate testing in a compact design.