Specialty Environmental Test Chamber Solutions

Weiss Technik offers a range of custom test chamber solutions, including those designed to test batteries, microwave systems, noxious gas, plant growth, clean rooms, emissions and more.

Browse our many test chamber solutions below, or choose a specialty solution category from the menu.

Weiss Technik altitude test chambers are designed based upon the specialized needs of the automobile industry and allow for a simulation of air pressure up to a height of 4000 meters. Regardless of location or season the combination of cold and climate allows for a broad range of test possibilities.
The Weiss Technik BHA-1 L/R system helps prevent the ambient temperature in the booth from falling below an acceptable storage temperature for the equipment inside. The unit can be run with either diesel or kerosene and is connected to the 24 V battery network of the container. Proper functionality of the installed system is guaranteed.
Noxious Gas Test To prove the resistance of the technical products to corrosive gases, Weiss Technik developed the corrosion test chambers cabinets series BSB. The BSB enables an exact dosage of the corrosive gases with a climate conditioned air volume. The main constituents of the corrosive, atmospheric trace elements are: sulphur dioxide (SO2), nitrogen oxide...
The D Series chamber is constructed of 16 gauge sheet metal with an air-dried lacquer-sprayed finish. The hinged lid gives full access to the workspace and is available with the option of viewing windows. In the larger D60 model, (2) 8″ to 10″ fan blades are mounted in the chamber to keep the dust in...
Weiss Technik takes the back pain out of loading test specimens in dust chambers with our removable EZ Load Front Panel, an option available on Weiss Techniks’ Dust Chambers, that allows the test product to be placed on the specimen rack without having to lift it over the chamber wall and lower it on the rack....
For the heating of glass fiber strands prior to impregnation in liquid plastic and manufacture of glass fiber reinforced plastic granulate.
Under precise test conditions emissions of volatile organic compounds (VOC) from materials and products can be determined. This is an excellent value for the money as its development was controlled and directed by the user (WKI) and therefore meets standard VOC measurements. Scientific measures and product testing are aimed at limiting organic emissions indoors for...
Weiss Techniks’ EA (temperature/altitude) and EAH (temperature/altitude/humidity) chambers are designed to allow the user to perform temperature, humidity, and altitude condition testing in one combined test chamber, with more than one condition created simultaneously to satisfy many types of test requirements. Our EA and EAH Series chambers are designed to simulate altitude conditions up to...
The Weiss Envirotronics EC Series Moist Cabinet/Curing Chambers are specifically designed for use in the making and curing of hydraulic cement and concrete test specimens and is equipped with both dry and submerged storage. Its large workspace has an operating temperature range of 15.6° C to 37.8° C and humidity range of 40% to 98% R.H....
With the Weiss Technik Model ED80-2-10-WC Temperature Cycling Chamber with Variable Speed Drive System, the user can test rotating devices at different temperatures. The rotating devices can have angular joints that require multiple angled positions. The drive system spins the shafts at a specific RPM, while allowing testing at various angles and different temperatures. The ED...
The test installation is used to determine the discharge of formaldehyde by substances which emit formaldehyde. The test requires a precise, reproducible determination of the possible subsequent formaldehyde discharge by wooden materials and components.
The system operates similar to the FAPE/+60, but is equipped with two test vessels, which can be used independently from each other. The interface displays the testing conditions of both vessels (one indication for each test vessel).
Fitotron® High Specification Plant Growth Chambers (HGC’s) are based on a modular design. Should your research requirements change, the chamber can be adapted to a new situation by exchanging or retrofitting your individual modules. In addition to three chamber sizes, it is possible to modify light sources and intensity, airflow direction, temperature range and the...
The Weiss Technik Fitotron® Standard Growth Room (SGR) offers unrivaled accuracy and reliability in the control of temperature, humidity and lighting. State-of-the-art programmer technology and energy efficient lighting systems are used to provide unequalled dependability and durability. This sustainable design offers the end-user a cost-effective solution and durability. This sustainable design offers the end-user a cost-effective...
Fitotron® Multi-tier Cultivation Rooms (MCR’s) have been specifically designed to suit a variety of different plant growth applications. They are ideal for research involving Arabidopsis and similar-sized plants. MCR’s can be assembled and fully operational within a short space of time – the ideal solution for immediate requirements. In addition, MCR’s can be fitted with...
Fitotron® Standard Growth Room (SGR) offer unsurpassed accuracy and reliability in the control of temperature, humidity and lighting. State-of-the-art program technology and energy efficient lighting systems are used which provide unequalled reliability and durability. This sustainable design offers the end-user a cost-effective solution and durability. This sustainable design offers the end-user a cost-effective solution. Description...
Fuel conditioning systems are used to carry out ORVR re-fuelling in vehicles in compliance with legal regulations and to test vehicle fuel tanks. In addition to the supply tank the main components comprise various gasoline nozzles, active and passive gas vapor recovery, pre-pay function, etc. Application Normally vehicles and/or fuel tanks are re-fuelled that are...
The Star Galaxy™ HALT/HASS systems are integrated test chamber/vibration table packages. These chambers are outfitted with a liquid nitrogen (LN2) cooling systems in order to provide the rapid thermal change rates required to achieve maximum product stress. The vibration table is a six degree-of-freedom (6DoF) tri-axial pneumatic vibration table.
UV light in sunlight and diffuse sky radiation is especially important. It can cause alterations in the surface of materials, which – accelerated by other climate factors, such as temperature and humidity – lead to the typical symptoms of aging. Staggered simulations of natural weathering in devices requires a restriction of the number of climate...
The amount of combustible solvents is nearly unlimited in this oven. It can be installed in the explosive zones 1 and 2. The design of the VTUW ovens eliminates the danger of an explosion. The VTUW is suitable for the temperature classes T1, T2, T3, T4 in the explosion groups IIA and IIB. In this...
The compact Weiss HKE 10 hygiene air-conditioning unit controls temperature and air humidity, it was built for climate control of an operating room integrated into a container. This unit creates acceptable hygienic conditions set forth in DIN 1946 part 4. The cooling capacity is 22 kW and has a heating capacity of 24 kW to...
The experience we have gained over decades in the world of heat technology results in high-quality and innovative products. Thus we was one of the first companies on the market who’s hot air sterilizers maintain the U.S. Federal Standard for class 100 (according to DIN EN ISO 14644-1, class 5) during an entire cycle. An...
The experience we have gained over decades in the world of heat technology results in high-quality and innovative products. Thus we was one of the first companies on the market who’s hot air sterilizers maintain the U.S. Federal Standard for class 100 (according to DIN EN ISO 14644-1, class 5) during an entire cycle. An...
Weiss partial air-conditioning units, type K13W-B, K15W-B, were specifically created for air-conditioning booths with electronics. These units protect high-end workshop equipment, protect sensitive electronics, and provide a comfortable indoor climate. This particular series of partial air conditioning units has cooling capacities of up to 5.8 kW and heating capacities up to 6.0 kW. The air-conditioning...
Weiss partial air-conditioning unit type K19-W, was specifically created for air-conditioning containers with electronic, team rooms, and training containers. These units are exceptionally quiet thanks to a special sound dampening buffer. This particular series of partial air conditioning units has cooling capacities of up to 12 kW and heating capacities up to 11 kW. These...
Weiss Technik partial air-conditioning units, type K1W-B, K2W-B, K4W-B were specifically created for air-conditioning telecommunications booths. Thanks to it’s compact dimensions internal installation is possible. These units protect high-end workshop equipment, protect sensitive electronics, and provide a comfortable indoor climate. This particular series of partial air conditioning units can operate at ambient temperatures of up...
Weiss partial air-conditioning unit type K23W-A, was specifically created for air-conditioning containers with electronic, team rooms, and training containers. These units are exceptionally quiet thanks to a special sound dampening buffer. This particular series of partial air conditioning units has greater cooling capacities than the K19-W, with up to 14 kW and heating capacities up...
The Weiss K29W-A is a partial air conditioning unit designed to be used in containers with radar systems and other high-end electronics. The unit is mounted with flanges to the outside of the container, and has been specifically designed not to interfere with the radar system of other electronics. The unit has an integrated NBC...
Weiss Technik partial air-conditioning units, type K30W-B, K31W-A, were specifically created for air-conditioning booths with high-end electronics or workshop equipment. These units protect high-end workshop equipment, protect sensitive electronics, and provide a comfortable indoor climate. This particular series of partial air conditioning units has cooling capacities of up to 8 kW and heating capacities up to...
The Weiss Technik BHA-1 L/R system helps prevent the ambient temperature in the booth from falling below an acceptable storage temperature for the equipment inside. The unit is externally attached with flanges, and is connected to the 24 V battery network of the container. The unit can be run with either diesel or kerosene and has...
Our K51W partial air conditioning units have cooling capacities up to 14 kW and heating capacities up to 9 kW. This allows them to used for a wide range of uses including medical care, mobile camps, and containers for mobile clinics and rescue centers as well as extendable containers. The units can be mounted in...
The Weiss Technik K64W-A2 partial air conditioning unit is designed for cooling high-end electronics and is very mobile. Power is supplied with a 24V DC power supply facilitating use in vehicles and cooling during transportation.
External charges such as low or high temperature, fast temperature change, humidity, mechanical charges or corrosion factors should not cause them to bring about undesired effects, such as failure. As such, Weiss develops and builds state-of-the-art systems for your specific needs. A wide selection of our basic systems can be added for testing Lithium-Ion energy storage:...
The Weiss Technik M.C.S. walk-in test chamber comprises a machine unit and a test chamber. The machine unit is assembled and tested in the assembly plant of Weiss GmbH before it is connected to the on-site test chamber. It is then calibrated and commissioned.                      ...
The newly developed VHM HEPHAISTOS is an internationally patented system and characterized by a high field homogeneity. For the first time, the advantages of microwave technology have been developed successfully to an industrially mature high technology. The high field homogeneity allows for the manufacture of high-quality CFC aircraft structures, for instance. Heating Drying Hardening
The Weiss Technik Module-R type C-D mobile air conditioning container system contains an evaporator module that can be integrated into an engineering room. The system is installed in a longitudinal position within the container.
The Weiss Technik Module-R type C-H mobile air-conditioning container is installed horizontally on the front side of the container. The Module-R series can be stacked on top of each other, and the evaporator module and condenser module are arranged outside the container or inside the engineering room.
The Weiss Technik Module-R type C-SP mobile air conditioning containers are a split system consisting of the evaporator module inside the unit, and the condenser unit outside. These two modules are connected by a quick release, leak-free coupling for the cooling liquid and strong connectors for the power supply. This system is particularly handy for areas...
The Weiss Technik Module-R type C-V mobile air-conditioning container system is installed vertically on the front side of the container. The evaporator module and condenser module are arranged outside of the container. All Module-R systems are vertically stackable.
The Weiss Technik Module-R type T-C mobile tent air conditioning system is installed external of the tent. The evaporator module and condenser module are also arranged outside of the tent. Up to two Module-R systems can be stacked vertically.
The Weiss Module-R type T-SP is a split mobile air conditioning system. The evaporator module is arranged inside the container while the condenser module is outside. Both modules are connected with quick release leak-free couplings for the cooling liquid and connectors for the power supply. This particular system is suited for areas where NBC (ColPro)...
Built for research laboratories, testing of material used for petrol hose lines.
The Weiss OP-RC 1a is a mobile operating system allowing users to safely operate under cleanroom conditions that mimic traditional operating theaters even in extreme climates. The system is quick to assemble and disassemble and consists of tents and mobile climate and cleanroom system. One notable feature of the system is the laminar flow unit...
The photo-stability test chambers, Pharma 250L Pharma 500L are characterized by ideal light, UV, temperature, and humidity distribution and can therefore guarantee a completely reproducible climate, UV and light conditions. The lighting equipment used in in compliance with the ICH guidelines, and Q1B Option 2 enables photo-stability tests to be carried out in less than...
High-Low Temperature and Temperature/Humidity Test Chambers. Custom sizes and configurations available.
Remote Conditioners or Equipment Cooling Air units are used to deliver temperature conditioned air to remote enclosures. Our Remote Conditioners may also be designed to act as a stand-alone test chamber for even greater flexibility
The RL SHED chamber was built to determine the emission of fuel vapors during driving. This system consists of a driver instructor unit with a ceiling mounted monitor, a dynamometer, emission analyzer, volume compensation with Tedlar foil, movable ceiling, software, and an airtight door. Dynamometer Test: The climate test chamber with built-in dynamometer test is...
The Weiss RRISO 7/8 mobile cleanroom was created to provide a work area for repairs, care, and maintenance of items which are sensitive to dust such as optical devices. The RR ISO 7/8 is designed in accordance with ISO 14644 and adheres to cleanroom class ISO 7/8. The system consists of tents, mobile air conditioning...
Baking out of temperature sensors under vacuum.
Solar test chamber. See features below.
The Weiss Technik SGC 120 Insect Incubation Chamber allows Entomologist’s needs to store and study insects, bees, and drosophila within a controllable environment. Each shelf is available with an optional bank of high frequency lighting, minimizing the effects of stroboscopic stress on insects.
The unique design of the Fitotron SGC 120 Arabidopsis Chamber allows researchers to measure and access small leaves that are tightly bunched together by providing unrestricted access measurements that were previously almost impossible to conduct.
The new Fitotron® SGC 120 is centered on core attributes of versatility and user-friendliness. It is these features, combined with exceptional quality, that sets it apart from any other chamber of its type. The SGC 120 is available in a variety of guises and offers a host of shelving and lighting options enabling it to...
The Fitotron® SGC 120 Plant Growth Chamber offers unsurpassed accuracy and reliability in the control of temperature, humidity and lighting. Larger plants of up to 1.5m can be grown inside the SGC 120. The SGC 120 allows the researcher access to most world climatic conditions whilst eliminating the variability found in nature.
The Weiss Technik SGC 120 Seed Storage Chamber is perfect for simulating the cool, dry conditions used for long-term seed storage. The SGC 120 comes with an air drying system to remove humidity to a level of 15%rh at 4°C. It combines user-friendliness and cost-effectiveness with unequalled durability and reliability.
The Weiss Technik Fitotron SGC 120 Tissue Culture Chamber provides insulated shelves, and a generous shelf area with the option of humidity of up to 80%rh available, further widening the capabilities of the SGC 120.
The SolarClimatic Series instruments are state-of-the-art test units for simulating temperature and climatic indoor and outdoor conditions with global irradiation. Influencing parameters such as global irradiation, temperature, and humidity they can be individually programmed in user configurable programs. The test chamber design of the units offers an economic alternative to large solar simulation equipment such...
Weiss Technik offers test systems for testing photovoltaic modules according to the standards IEC 61215 und IEC 61646. We provide also the suitable test chamber for temperature shock cycling tests, humidity freezing tests and damp heat tests.
Dust tests are mainly performed to test functioning of electronic components under extreme environmental conditions. Various standards specify e.g. the test duration and the composition of dust used. The dust is filled in the funnel below the test space. The formation of dust within the test space is effected by compressed air injection through four...
Sterilization of thermo-resistant materials (test tubes, vials, transport containers, instruments, pastes, granules etc).
The Weiss Technik STA 3-A brine temperature control unit was designed with antenna systems and high-end electronics in mind. The unit has two separate cooling circuits for antenna brine cooling allowing for a constant temperature of +5°C and direct temperature control of the workspace. NBC (Colpro) protection is available for this unit. Cooling and heating...
The Weiss STA 5-A brine temperature control unit was designed with antenna systems and high-end electronics in mind. The STA 5-A modules require little container space thanks to their compact design. The control module can be controlled from the operator room and can be integrated into a 19” rack. The system reliably cools a constant...
The Weiss Technik STA 6-A brine temperature control unit is not a split system, but a compact system for cooling high-end electronics and antennae systems. Like the ST-A5 the controller module can be integrated into a 19” rack and controlled from the operator room. The operational temperature range is -40°C to +55°C, the system will...
The WK3-0 was designed for long term and accelerated stability tests. It is capable of simulating the different climates and/or seasonal climates and the various climate zones of the world. The components that have been exposed to a long-term test and/or and accelerated service life played a key role throughout the development and construction of...
The SWT testing equipment is for testing the protection of housings against water penetration. The SWT tests in accordance to DIN VDE 0470 T1, EN 60529 and for protection code testing (IP-Code). The SWT has a test timer, this allows for the test cycle to be automated with a time-table of 3 seconds to 30...
The Weiss Technik temperature controlled trailer is ideal for mobile pre-temperature of ammunition and explosives such as measuring of ballistic properties at a different material temperature. The trailer meets all requirements necessary for transport: explosion-proof work space and interior made of stainless steel. Specimens can easily be saved and cooling to -65°C is possible. A separate...
Innovative humidification for tensile tests under extreme condition. The Tensile series of climate chambers for material test rigs distinguishes itself by adding an additional dimension to the climate control. Humidification using an efficient system developed by Weiss Technik ensures precise control. Models: CE Model: Compact design with individual coolers behind the test chamber up to...
TWO ZONE, SINGLE CAPACITY (-2) (One hot zone & one cold zone) The products under test travel via a carrier basket, alternating between the hot and cold zones. TWO ZONE, DOUBLE CAPACITY (-2D) (Two hot zones & one cold zone) In the two zone, double capacity system, the cold zone is always in use, which...
The TS Series is a liquid-to-liquid thermal shock bath designed to operate for semiconductor devices within current military standards (Mil-Std 883 Method 1011.8 and Mil-Std 202 Method 107G, and with a load between 7.5 and 10 lbs. Through the use of a robotic arm the basket is able to travel between the hot and cold...
TWO ZONE, SINGLE CAPACITY (-2) (One hot zone & one cold zone) The products under test travel via a vertical lift elevator, alternating between the hot and cold zones. TWO ZONE, DOUBLE CAPACITY (-2D) (Two hot zones & one cold zone) In the two zone, double capacity system, the cold zone is always in use,...
The TS-120 test chamber consists of two independently controlled chambers, one that is hot and one that is cold. The temperature shock between hot and cold is achieved thanks to the rapid transfer of the specimens on the lift and the subsequent exposure to a wide range of temperatures.  
The TS-60 test chamber is made of two independently controlled chambers. One chamber is hot and the other one is cold. The temperature shock between hot and cold is created with the rapid transfer of the specimens on the lift and the subsequent exposure to a wide range of temperatures.  
The VVT vacuum drying ovens are remarkable for reduced drying times by optimizing drying conditions for light, powdery products. Products from almost all branches of industry can be dried in a vacuum drying oven.
For the hardening of carbon fiber molded parts
Explosion resistant heating oven and drying oven VFT 60/90 The VFT 60/90 is an explosion resistant fresh air heating and drying oven. The oven is electrically heated and designed according to the fresh-air-principle. Due to the small floor space required it is also suitable for installation in laboratories and production departments. The advantages, e.g. no...
For the hardening of fiber composites and warming-up of resin.
Designed for hardening of fiber-reinforced composite structures and heating up of resin packages.
Sterilization for pharmaceutical containers.
Sterilization of thermo-stable material (reservoirs, laboratory equipment).
Sterilizing of thermo-stable materials.
Drying of pure-water impregnated filtration cartridge.
Explosion resistant heating and drying oven for drying of alcohol-impregnated filtration cartridge.
For the drying of pharmaceutical active agents and end products.
For powder drying in the flat display production.
Drying process of minute mechanical components
Sterilization of heat-resistant materials.
The VT 4002 EMC is a miniature temperature test chamber equipped with optimal shielding attenuation. The shielding attenuation was measured and certified by the Institute for Electric Energy Systems and High-Voltage Engineering (EH) of the University of Karlsruhe (TH). The test space is designed so that the interior container takes over a shield function.
The temperature test cabinets series VT 4021 / 7021 EMC are equipped with optimal shielding attenuation with a test space volume of approx. 200 liters and a temperature range from -35 °C/-65 °C to 100 °C. The shielding attenuation was measured and certified by the Institute for Electric Energy Systems and High-Voltage Engineering (EH) of...
The Weiss Technik VT Mini Shed Chambers are used for fuel tank permeation tests or for HC emission tests in fuel carrying vehicle components. The equipment consists of a volume compensation device, explosion-proof test-space, an analyzer, lighting, a window, a refueling port and purging and safety equipment.
The VT Shed chambers are for determining evaporation on motor vehicles in accordance with EPA, CARB and EU cregulations. One main feature of this test system is volume compensation with the use of a tedlar bag or moveable ceiling enabling temperature profiles to be performed with a hermetically sealed chamber without a differential pressure to...
Clean room heating furnace and drying oven for baking coatings. For heat treatment of parts under clean room conditions in controlled atmosphere (e.g. N2).
The VTF clean room heating and drying ovens are available in six sizes with workspace volumes between 60 liters and 3,125 liters and with nominal temperatures of 250 °C, 300 °C and 350 °C. The laminar flow technique creates a laminar, low-turbulence state of flow with a particularly homogeneous distribution of temperature thus ensuring optimum,...
Drying of water-humid granules in batch mode under GMP conditions.
For the drying of water- and solvent-moist granulate material
Vacuum Dryer for drying of components used in the aerospace industry (engines, valves etc.)
The WIBOjekt- and the WIBObarrier® system are the basic systems of all WIBO units. Especially shaped air outlets, so-called ejectors create a clean-air curtain that separates the work area and the surrounding area from each other safely. By means of the clean-air curtain as separation between the product and the person, the WIBOjekt® principle protects...
The WK BM 1000 represents the first complete solution in the form of a combined measuring robotic and climate test chamber – for function dependent component tests under extreme climatic conditions (-40°C to +85°C) and with rapid temperature changes in testing and production. Application Measuring, testing and moving products in the climate chamber in the...
Our WK3-0 climate cabinet was designed to simulate long term and accelerated stability tests involving different climates and/or seasonal climates and the climatic zones of the world. The specimens that have been exposed to long-term testing or accelerated service testing played a primary role throughout the development and construction process of the WK3-0.
The WT series test chambers are both economical and extremely effective. The series is equipped with all you need to perform cold-heat tests in extreme temperature ranges that comply with the relevant standards. With their compact design these chambers are perfectly suitable for factories and laboratories where space is limited.
The WT/D and WK/D vacuum-temperature and vacuum climate test chambers offer a way for reproducible tests of aviation industry components, are highly stressed. Our chambers allow the simulation of extreme flight programs in accordance with the relevant standards. For many years they have been applied in the fields of research, development, production and quality control.
The WT/WK series of walk-in temperature and climate test chambers are especially developed for large test specimens. Size and design mean optimal loading of test specimens. The modular construction and variability in size and equipment is ideally for costumer specific application.
Many products emit inflammable substances. Combined with air, these substances can develop with air a gas mixture, which is explosive. In order to prevent such an atmosphere that will cause an explosion, special precautions need to be taken. For such applications, Weiss offers the WT/WK-II 2 G EEx IIB T3 (ex-proof test chamber) series, which...
For testing organic materials, in particular testing elastomers the ozone endurance test if of utmost importance.
The WT3-V/WK3-V Weiss Technik testing systems represent the broad performance range of our test systems. These test systems enable you to simulate dynamic processes, mechanical as well as thermal loads, which affect components and equipment. With a total of 36 test cabinets in 3 sizes with volumes of 600, 1200, and 2200 liters, and two temperature...
This robust temperature and climate test chamber raises the industry standard to ease operation, performance, and reliability. With a patented climate and temperature conditioning system you can create more productive and easily replicated tests for a larger number of products.
With the WTL and WKL chambers of Weiss reproducible climate and temperature tests can be performed directly at your work area. This test chamber was specifically developed for usage in labs with compact dimensions and considerable intrinsic values.
The WTS-3/WKS-3 test system is based on our tried and true modules, the WT and WK SERIES, now offer increased power for heating, cooling and circulating air. These chambers have volumes ranging from 190 to 1540 liters, and are capable of meeting virtually all requirements of contemporary ESS testing.
The Xtreme™ Series from Weiss Technik provides more power for your tough testing applications. Xtreme provides ESS (Environmental Stress Screening) conditions in a 5C°/10C°/15C° per minute change rate. Available in a wide range of sizes, one to fit any testing requirement.  
Weiss has developed the ZKB 10/6 MF and 15/10 MFA tent air conditioning units in a dual design to be used for NBC protection and Colpro systems. The units can be used as a recirculating system. The cooling capacity is 11 kW and the heating capacity is 7.2 kW. The units come with option to...
The Weiss Technik ZKB tent air conditioner is ideal for use in functional shelters and tents for housing people. The units are capable of creating an environment that people will feel comfortable in, despite ambient climate conditions. Thanks to the compact design of these units they require minimal room. The ZKB tent air conditioners can...
The Weiss ZKB 15/10 MFA-RR 1b air conditioning unit has been developed to condition air within medical and rescue tents in addition to fully equipped operating tents. This particular unit has been tested and adheres with DIN 1946-2008-12 and conforms to cleanroom class 1b. The unit is equipped with a three stage HEPA with a...
The Weiss type ZKB mobile air conditioning system shows its true strength in scenarios where overcoming extreme climate conditions are paramount, particularly for areas where NBC protection measures (ColPro) are required. The split system can be operated as an air circulation system with the capacitor module placed outside the container while the evaporator is placed...
The Weiss ZKB 20/18 and the ZKB 20/18-B series are mobile air conditioning systems that have been specifically designed for mobile cleanrooms, command posts, and medical/rescue tents. These systems will operate reliably even at temperatures reaching up to +60° C with a cooling capacity up to 18 kW. The ZKB 20/18 comes standard with a...