Walk-In/Drive-In

Browse Weiss Technik Walk-In/Drive-In test chamber models, including those designed for altitude testing, stability testing, as well as chambers that integrate with Dynamometers. To learn more about any of our models below, contact us here.

Weiss Technik altitude test chambers are designed based upon the specialized needs of the automobile industry and allow for a simulation of air pressure up to a height of 4000 meters. Regardless of location or season the combination of cold and climate allows for a broad range of test possibilities.
The pre-fabricated Walk-In/Drive-In test chamber’s modular construction facilitates ease of move-in and setup. The WP Series accepts all sizes of Envirotronics roll-up conditioning modules. WP Series is suited for many Telcordia (Bellcore) applications.
The Weiss Technik M.C.S. walk-in test chamber comprises a machine unit and a test chamber. The machine unit is assembled and tested in the assembly plant of Weiss GmbH before it is connected to the on-site test chamber. It is then calibrated and commissioned.                      ...
The RL SHED chamber was built to determine the emission of fuel vapors during driving. This system consists of a driver instructor unit with a ceiling mounted monitor, a dynamometer, emission analyzer, volume compensation with Tedlar foil, movable ceiling, software, and an airtight door. Dynamometer Test: The climate test chamber with built-in dynamometer test is...
The Climate-Alternating-Corrosion Test Chamber type SC 1000/15-60 IU meets the requirements of standard DIN 50 021/DIN EN ISO 9227 and allows the performance of corrosion alternating tests according to VDA Test 621-415 B with freezing (“VDA New”).
Weiss Technik stability test chambers can be validated and are designed  meet your specific requirements. The included insulation elements for the chambers can be optimally adapted to an existing building structure since adherence to standard dimensions is not necessary. The standard height is usually 2700 mm; other dimensions are possible.
The pre-fabricated Walk-In/Drive-In test chamber’s modular construction facilitates ease of move-in and setup. The WP Series accepts all sizes of roll-up conditioning modules. WP Series is suited for many Telcordia (Bellcore) applications. The WP Series has temperatures up to 150 C (302 F) available providing greater testing options.
The WT/WK series of walk-in temperature and climate test chambers are especially developed for large test specimens. Size and design mean optimal loading of test specimens. The modular construction and variability in size and equipment is ideally for costumer specific application.
The integral welded floors provide proper drainage of water/fluids. The unit’s one-piece custom construction makes the chambers very easy to install. Larger units can be constructed on site.