TS-120

The TS-120 test chamber consists of two independently controlled chambers, one that is hot and one that is cold. The temperature shock between hot and cold is achieved thanks to the rapid transfer of the specimens on the lift and the subsequent exposure to a wide range of temperatures.

 
 

Application

The reliability and functionality of electronic components, devices, and systems is heavily influenced by environmental conditions. In order to determine whether sudden temperature change may have an impact on the specimen’s long-term functionality. These types of tests help to identify part and workmanship defects in construction without reaching the thermal and mechanical stress limits. Through using ESS (Environmental Stress Screening) such defects can be recognized early on in the production stages. An accurate prediction of the products life expectancy can be made after a few hundred, or few a thousand, temperature cycle tests have been completed.

  • Test space 120 l
  • Vertical order of the chamber for safe and quick test performance
  • Regular temperature distribution in test space via a high recirculating rate with optimum air flow
  • Hot chamber temperatures of +50 °C to +220 °C
  • Cold chamber temperatures of –80 °C to +70 °C
  • Alternating time between the chambers <10 sec.
  • More than 1,000 cycles are possible without defrosting via a standard integrated volume compensation system for continuously operation
  • Low sound-pressure level, only 58 dB(A)
  • Design maintenance friendly positioning of the machine components
  • Entry port Ø 80 mm
  • Loading capacity of the lift 50 kg
  • 8" TFT-color touch screen display
  • Control pad
  • Ready to plug-in
  • Window in hot zone
  • Ultra-lightweight shelf incl. rails
  • Lift in loading position locked
  • Entry port Ø 80 mm
  • Volume compensation system for long-term operation
  • Air-cooled refrigeration unit
  • Hermetically sealed CFC-free refrigeration circuits
  • 8" TFT-color touch screen display
  • CONTROLPAD* for indication of actual values
  • 32 bit control and monitoring system S!MPAC*
  • Software S!MCONTROL* for comfortable operation
  • Interfaces RS 232/USB/Ethernet
  • Digital I/O, potential-free, 24 V, 4 freely available inputs/outputs
  • Independent adjustable temperature limiter (tmin/tmax ) for hot and cold zone
  • Potential-free contact for switching-off of test specimens
  • Adjustable software temperature limiter min/max
  • Operating hour counter
  • Temperature control via sensor in cradle or in hot or cold zone
  • Defrosting cycles automatic and programmable
  • Dwell time start programmable
  • Standards already programmed and recallable
  • Mobile version
  • Calibration of two temperature values
  • Powder-coated housing made of galvanized steel sheet
  • Test space, lift and insert shelves (insert baskets) made of corrosion resistant stainless steel
ts-60-and-120-spec-sheet
  • Analogue transducer l/O
  • Temp. measuring on test specimen
  • Temp. range extension to +250 °C
  • Wire mesh and insert shelves
  • Additional entry port Ø 80 mm
  • Connection for GN2
  • Shock cooling with LN2
  • Water-cooled refrigeration unit
  • Special voltages
  • WKD or DKD calibrations
  • Interface RS 232 <--> lEEE 488
  • Interface RS 422/485 (network card for test cabinet)
  • Software Simpati* for network operation