D60
D60

D60

Weiss Technik takes the back pain out of loading test specimens in dust chambers with our removable EZ Load Front Panel, an option available on Weiss Techniks' Dust Chambers, that allows the test product to be placed on the specimen rack without having to lift it over the chamber wall and lower it on the rack. It's easy to load and easy on your back. The removable panel is held firmly in place by compression latches. The latch pressure and the front panel gasket create a positive seal that keeps the dust out of your lab and inside your chamber, where it belongs. The front Panel has been removed, allowing easy access to the specimen rack. Note: The EZ Load Panel is an option that may not be available on all models. The Weiss Technik D Series Dust Chamber is designed to test a component's resistance to a dust-filled environment as defined in SAE Dust Test Specifications J-575, Section 4.5. The product is placed on the specimen rack and dust is agitated throughout the chamber by injecting compressed air into each of the dust troughs. The dust then settles, covering the product under test. A compressed air pressure regulation system with filter and trap is provided for connection to your air supply. Air must be supplied at a minimum pressure of 80 psi and 10 CFM. The D Series' control timers allow pre-setting the agitation, the number of agitation intervals, and the number of cycles with automatic shutdown at the end of the preset number of cycles.
  • Total access chamber lid stays open at 60 degree angle
  • Chamber lid is gasketed with closed cell foam material
  • Lid is equipped with quick-release latch hardware
  • Pressure relief vent with filter
  • Removable stainless steel wire grate specimen platform
  • Removable spray nozzles
  • Compressed air pressure regulation system with filter and trap
  • (2) adjustable interval digital timers and (1) counter timer
  • Compressed air dual tower air drier system dries air to a -85˚F/-65˚C dewpoint level
  • 115-1-60 V power in with an amp draw of 5 Amps
  • Interior light with exterior switch
D60 spec sheet
The new removable EZ Load Front Panel, an option available on Weiss Techniks’ Dust Chambers, allows the test product to be placed on the specimen rack without having to lift it over the chamber wall and lower it on the rack. It’s easy to load and easy on your back. • Custom sizes available consult with your local salesperson • Many options available - contact your local salesperson for complete list
D60
D60