Oil & Gas

Noxious Gas Test

To prove the resistance of the technical products to corrosive gases, Weiss Technik developed the corrosion test chambers cabinets series BSB. The BSB enables an exact dosage of the corrosive gases with a climate conditioned air volume. The main constituents of the corrosive, atmospheric trace elements are: sulphur dioxide (SO2), nitrogen oxide (NOx), hydrogen sulphide (H2S) and chlorine gas (CL2). The basic unit consists of a test system of series Klima 3000 with 340, 600 and 1000 liters.  
Under precise test conditions emissions of volatile organic compounds (VOC) from materials and products can be determined. This is an excellent value for the money as its development was controlled and directed by the user (WKI) and therefore meets standard VOC measurements. Scientific measures and product testing are aimed at limiting organic emissions indoors for improved consumer protection.
The Endurance® Series from Weiss Technik—the Fast Rate Temperature & Humidity chamber that stands alone. Designed and engineered to give you lasting value, performance and reliability for all your climate testing applications. The intelligent engineered test space design allows for maximum airflow coverage and accurate gradients. Many popular sizes available that allow you to choose the chamber that best fits your needs, while the mobile design allows for greater flexibility. Choose Ramp Rates of 3.0 C/min, 5.0 C/min, 10 C/min, and 15 C/min.
The system operates similar to the FAPE/+60, but is equipped with two test vessels, which can be used independently from each other. The interface displays the testing conditions of both vessels (one indication for each test vessel).
UV light in sunlight and diffuse sky radiation is especially important. It can cause alterations in the surface of materials, which – accelerated by other climate factors, such as temperature and humidity – lead to the typical symptoms of aging. Staggered simulations of natural weathering in devices requires a restriction of the number of climate values or their cyclic alterations. The Global-UV test unit simulates the most important climate factors which are relevant for aging. In other test procedures, too much attention is paid to the simulation of the entire global radiation and the simulation of other important climate factors is neglected. However, it is also important that temperature conditioning and humidification are controlled in a reproducible manner and that the air is humidified without aerosols. Moreover, any uncontrolled overheating on account of the radiant heat of the lamps has to be prevented. Test procedures according to DIN EN ISO 4892-2 prescribe e. g. the simulation of the overall range of global radiation, the disadvantage of which is that the influencing factors of specimen temperature and humidity or their cyclic alterations can only be controlled very vaguely. In test procedures with fluorescent lamps according to DIN EN ISO 4892-3 only the simulation of the photochemically effective spectral range ≤400 nm (UV-A and UV-B radiation) is prescribed. This means we dispense with radiation heating of the specimens but gain the possibility of climate conditioning the specimens in the entire natural temperature and humidity range in a precise and reproducible manner. Within the UV-Global test unit, radiation is effected with special fluorescent lamps in the wavelength range from 290 nm to 450 nm.

The RL SHED chamber was built to determine the emission of fuel vapors during driving. This system consists of a driver instructor unit with a ceiling mounted monitor, a dynamometer, emission analyzer, volume compensation with Tedlar foil, movable ceiling, software, and an airtight door.

Dynamometer Test:

The climate test chamber with built-in dynamometer test is fully capable of performing emission tests in accordance to European and American guidelines. Weiss Technik offers professional advice, after-sales-service and everything in between.

The Climate-Alternating-Corrosion Test Chamber type SC 1000/15-60 IU meets the requirements of standard DIN 50 021/DIN EN ISO 9227 and allows the performance of corrosion alternating tests according to VDA Test 621-415 B with freezing ("VDA New").
In addition to the salt spray test chambers of the SC/KWT series, Weiss Technik also offers walk-in salt spray test chambers that allow for the testing of the corrosion behavior of large components.
The SC/UKWT 1000 is a performance salt fog and condensed water test chamber. The chamber has a climate extension that allows for cycles with controlled humidity and drying/ventilation as well as combination alternating tests with cycles.
The SolarClimatic Series instruments are state-of-the-art test units for simulating temperature and climatic indoor and outdoor conditions with global irradiation. Influencing parameters such as global irradiation, temperature, and humidity they can be individually programmed in user configurable programs. The test chamber design of the units offers an economic alternative to large solar simulation equipment such as Walk In or Drive In Chambers.
The Weiss Technik VT Mini Shed Chambers are used for fuel tank permeation tests or for HC emission tests in fuel carrying vehicle components. The equipment consists of a volume compensation device, explosion-proof test-space, an analyzer, lighting, a window, a refueling port and purging and safety equipment.
The VT Shed chambers are for determining evaporation on motor vehicles in accordance with EPA, CARB and EU cregulations. One main feature of this test system is volume compensation with the use of a tedlar bag or moveable ceiling enabling temperature profiles to be performed with a hermetically sealed chamber without a differential pressure to enable ambient values. In addition to exhaust emissions caused by traffic, hydrocarbon vapors are also emitted when refuelling tank systems and by the vehicle itself. Due to the globalization of the automobile industry, the strict regulations of the American Environmental Protection Authorities EPA and CARB have found world-wide recognition in the specifications defining the requirements of environmental simulation technology. The SHED chambers of Weiss Technik which can be temperature conditioned comply with these requirements. Many leading automobile manufacturers and renowned suppliers repeatedly choose Weiss environmental simulation technology for very good reasons. Not least because Weiss Technik is one of the leading manufacturers of testing systems world-wide.
For testing organic materials, in particular testing elastomers the ozone endurance test if of utmost importance.
The Xceed Custom Reach-In Series is the environmental test chamber from Weiss Technik that gives unlimited options. Designed, engineered, and built to your specifications the Xceed Series offers flexible temperature and humidity ranges, sizes that meet your exact testing requirement and available options that provide unmatched product testing applications.
Xcel Converto from Weiss Technik the modular test chamber system with breakthrough patent pending technologies. Click on link below for Xcel Converto video:
  • Xcel Converto™ technology allows the user a modular, changeable, and expandable test chamber system resulting in reduced test set-up time, and greater flexibility for ever-changing test requirements.
  • LEEF™ (Leading Energy Efficiency Footprint) technology is a high-efficiency refrigeration system that provides unmatched performance; it features optimal temperature and humidity control accuracy for precise testing results, faster ramp rates, and up to 40% energy savings.
  • WEBSeason® is a precise user-friendly controller that offers real time multi-user multi-language programming and monitoring from any device from anywhere in the world simultaneously.