Plastics

For the heating of glass fiber strands prior to impregnation in liquid plastic and manufacture of glass fiber reinforced plastic granulate.
The Endurance® Series from Weiss Technik—the Fast Rate Temperature & Humidity chamber that stands alone. Designed and engineered to give you lasting value, performance and reliability for all your climate testing applications. The intelligent engineered test space design allows for maximum airflow coverage and accurate gradients. Many popular sizes available that allow you to choose the chamber that best fits your needs, while the mobile design allows for greater flexibility. Choose Ramp Rates of 3.0 C/min, 5.0 C/min, 10 C/min, and 15 C/min.
The newly developed VHM HEPHAISTOS is an internationally patented system and characterized by a high field homogeneity. For the first time, the advantages of microwave technology have been developed successfully to an industrially mature high technology. The high field homogeneity allows for the manufacture of high-quality CFC aircraft structures, for instance.
  • Heating
  • Drying
  • Hardening
TWO ZONE, SINGLE CAPACITY (-2) (One hot zone & one cold zone) The products under test travel via a carrier basket, alternating between the hot and cold zones. TWO ZONE, DOUBLE CAPACITY (-2D) (Two hot zones & one cold zone) In the two zone, double capacity system, the cold zone is always in use, which contributes to the efficiency of the system. THREE ZONE, SINGLE CAPACITY (-3) (One hot zone, one ambient zone & one cold zone) In the horizontal three zone, the products travel via a carrier basket between the cold and ambient zones, and the hot zone travels to envelop the carrier basket.
TWO ZONE, SINGLE CAPACITY (-2) (One hot zone & one cold zone) The products under test travel via a vertical lift elevator, alternating between the hot and cold zones. TWO ZONE, DOUBLE CAPACITY (-2D) (Two hot zones & one cold zone) In the two zone, double capacity system, the cold zone is always in use, which contributes to the efficiency of the system.

The TS-120 test chamber consists of two independently controlled chambers, one that is hot and one that is cold. The temperature shock between hot and cold is achieved thanks to the rapid transfer of the specimens on the lift and the subsequent exposure to a wide range of temperatures.

 

The TS-60 test chamber is made of two independently controlled chambers. One chamber is hot and the other one is cold. The temperature shock between hot and cold is created with the rapid transfer of the specimens on the lift and the subsequent exposure to a wide range of temperatures.

 
The TU 60/60 drying oven offers an unparalleled level of performance when compared to the classical laboratory equipment. The TU 60/60 offers easy loading and unloading, has a small design and short heating times thanks to high powered heaters, short drying cycles courtesy of an optimized air flow with extensive air exchange as well as offering precise and consistent temperature values throughout the entire machine.
Built for tempering, ageing and distressing of metal parts, sintering of PTFE, etc.
The tempering ovens series VAW represent a construction concept which was proved, tested and enhanced over decades and therefore, is suitable for many heat treatment processes on different materials. Universal use up to 750°C in standard models. For applications with temperatures exceeding 400 °C, we offer customized solutions. The examples listed are only an extract of realized tailor-made projects. Please contact us by email or give us a call, and a qualified staff member will advise you.
For the hardening of carbon fiber molded parts
For the hardening of fiber composites and warming-up of resin.
Designed for hardening of fiber-reinforced composite structures and heating up of resin packages.
VTU
These heating and drying ovens are available in 7 sizes with a comprehensive range of accessories, e.g. loading trolleys, temperature controller etc. They can be used globally for heating and drying processes in the production and research.
For the drying of water- and solvent-moist granulate material
Many products emit inflammable substances. Combined with air, these substances can develop with air a gas mixture, which is explosive. In order to prevent such an atmosphere that will cause an explosion, special precautions need to be taken. For such applications, Weiss offers the WT/WK-II 2 G EEx IIB T3 (ex-proof test chamber) series, which enables tests to be carried out in a potentially explosive test environment within the test chamber.
The Xceed Custom Reach-In Series is the environmental test chamber from Weiss Technik that gives unlimited options. Designed, engineered, and built to your specifications the Xceed Series offers flexible temperature and humidity ranges, sizes that meet your exact testing requirement and available options that provide unmatched product testing applications.
Xcel Converto from Weiss Technik the modular test chamber system with breakthrough patent pending technologies. Click on link below for Xcel Converto video:
  • Xcel Converto™ technology allows the user a modular, changeable, and expandable test chamber system resulting in reduced test set-up time, and greater flexibility for ever-changing test requirements.
  • LEEF™ (Leading Energy Efficiency Footprint) technology is a high-efficiency refrigeration system that provides unmatched performance; it features optimal temperature and humidity control accuracy for precise testing results, faster ramp rates, and up to 40% energy savings.
  • WEBSeason® is a precise user-friendly controller that offers real time multi-user multi-language programming and monitoring from any device from anywhere in the world simultaneously.