Heat Technology

Find information below about the available oven systems from Weiss Technik, including those designed for the sintering of sockets, hardening of epoxy resin, vulcanization and shaping of vehicle refrigerant hoses and more.

Browse our continuous and tempering over systems below. Contact us today for more information.

Heating and drying oven for polymerization of spectacle lenses made of plastic material  
Heating and drying oven for sintering of sockets made from PTFE  

Drying Chamber for Coating Materials LTU 60/60 according EN1539

The LTU 60/60 is a drying oven for coating materials that contain solvents. Throughout the drying process the solvents are emitted from the surface coatings, varnishes, and impregnation resins which when mixed with air can result in an explosive atmosphere. The LTU 60/60 was designed to fulfill the safety requirements of EN 1539.  
Build for hardening of casting compounds and fiber reinforced material.
Drying of photosensitive resist on glass panes for manufacturing measuring tapes under clean-room conditions.
Drying and tempering of PTFE fabricated product.
Hardening of epoxy resin impregnated carbon fiber pipes.
Changing the shape of fiber optical waveguides that are used to detect elementary particles.
The TU 60/60 drying oven offers an unparalleled level of performance when compared to the classical laboratory equipment. The TU 60/60 offers easy loading and unloading, has a small design and short heating times thanks to high powered heaters, short drying cycles courtesy of an optimized air flow with extensive air exchange as well as offering precise and consistent temperature values throughout the entire machine.

Our TUD 150/60/365-250°C with cooling zone is designed for the vulcanization and shaping of vehicle refrigerant hoses. Learn more about the features of this continuous oven system.

The TUD 25/25/300 from Weiss Technik is designed for adhesive hardenening of SMD components, specially coils.

Find more information regarding this continuous oven system and contact us to request a quote.

A glass cooling oven for stress relieving and cooling of glass products.
Built for tempering, ageing and distressing of metal parts, sintering of PTFE, etc.
Designed for heat treatment under inert gas and forming gas atmospheres.
Heat treatment of airplane landing gear and brakes.
The tempering ovens series VAW represent a construction concept which was proved, tested and enhanced over decades and therefore, is suitable for many heat treatment processes on different materials. Universal use up to 750°C in standard models. For applications with temperatures exceeding 400 °C, we offer customized solutions. The examples listed are only an extract of realized tailor-made projects. Please contact us by email or give us a call, and a qualified staff member will advise you.

Our VDL 130/15/400-200°C continuous oven system is built for the hardening of closing plugs for medicine vials. Learn more about the special features of this system below.

For the drying of printed circuit boards.
Built for drying and tempering of sinter metal parts and heat treatment of bulk materials.
Continuous oven for curing of silicone-like sealing compound in impulse sensors.
Designed for the annealing of pressure controllers, learn more about this continuous oven system from Weiss Technik North America below. Contact us today for more information or to request a quote.
For the hardening of carbon fiber molded parts
Built to harden glue on electrical components
Designed for the curing of coating of plastic lenses.
Continuous oven with cooling zone for tempering of different bulb sockets (plastics)
Built for the heating of dashboards for the polymerization of adhesives.
Continuous oven with cooling zone for curing adhesive joints on reflector discs.
Designed to assist with annealing of compensators.
Curing of resin impregnated fiber composite pipes.
Drying oven for coating materials for simulation of coil coating process. Testing oven for surface coating.
VTU
These heating and drying ovens are available in 7 sizes with a comprehensive range of accessories, e.g. loading trolleys, temperature controller etc. They can be used globally for heating and drying processes in the production and research.
Built for the hardening processes in the manufacture of spectacle lenses made of plastic material.
Heat treatment of toothed wheels for car gearings.
Built for the drying of printed and resin soaked pattern prints fastened to a frame.
Heating of suspended sheets for subsequent shaping.
Heating and drying oven for tempering of SMD on a lead frame band  
Designed for curing of encapsulated motor coils.
Built for heating and tempering plastic sheets and glass panes.
Heating and drying oven for drying of rotors for centrifuges and long, upright parts.
For use in the production of laminated safety glass panes for cars (Tempering under vacuum atmosphere)
Curing of thermoplastics and carbon-reinforced components.
Heating and tempering of plastic sheets under an inert, protective gas atmosphere (N2)
Tempering and Curing oven for Curing of carbon-reinforced components.
Designed for hardening of large fiber-reinforced composite parts at 110°C.
Designed to seal lead crystal shapes into plastic.
Designed for heat treatment of rubber/metal gaskets for vehicle gears.