Vacuum Test Chamber

Product Features

• Vacuum system for continuous dilution of the test space atmosphere until it reaches the required vacuum
• The outer casing is made of corrosion-resistant, galvanized sheet steel with an environmentally friendly coating
• Test chamber door is hinged on the left for the whole cross section of test space
• Test chamber door has optimum pressure when closed
• Maintenance-friendly position
• The entire power electronics is located in a switch cabinet at the right side wall of the test chamber
• Safety mechanism which switches off the relevant function circuit and/or the entire test chamber
• The test space is made of high-quality stainless steel and is vacuum- and vapor-tight welded
• Separate sensors to protect the specimens irrespective of the temperature control system
• Additional ducts in the side panels are provided for the electrical connections of the specimens from the outside

Standard Version

• Low/high temperature safety cutout as per EN 60519-2 (1993) with separate sensor, thermal safety class 2
• Touch panel
• Ethernet interface
• 4 potential-free switching inputs and outputs
• Contactless switching of heating panel
• 50 mm entry port in the right side panel
• Water-cooled condensers