Meet your test standards with Weiss Technik
Test Standard
Test Standard Description
Weiss Technik Chamber Solution
EN 60068-2-60
Corrosive Gas Testing, low corrosive gas concentrations, mixed gas test, low gas ppb concentration test,
DIN 72300-4 and ISO 16750-4 5.4.2 Water Shock
Water Shock, air/ice water test, Thermal shock test cabinet for air/ice water tests, Splash water test
DIN EN 60529 September 2000
Spray Water Testing, Spray Splash Water Test, IP Test, IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX6K, IPX9K
Weathering tests:
DIN EN ISO 4892-3, procedure A (lamp combination)
cycle number 3+4
DIN EN 12224
VDI 3958 page 12
DIN EN 1297
EOTA TR-010
NF T 30-049 *
NF P 84-402 *
Acid precipitations:
ADF (Acid Dew and Fog) VDI 3958 page 12) *1
AR (Acid Rain) VDI 3958, page 12
DIN 55663 draft
Weathering test chamber, ADF test, acid dew and fog text, AR test, acid rain test
Low-temperature tests
IEC 60068-2-1, Test A
High-temperature tests
IEC 60068-2-2, Test B
Alternating temperature tests
IEC 60068-2-14, Test Nb
Constant Climates
IEC 60068-2-67
IEC 60068-2-78
Solar simulation tests
MIL-STD-810 G, Meth. 505.5 Procedure II
DIN 75220
PV 1211
PR 306.4
Solar simulation test chamber
ASTM G 85, A2, A3, A5
Nissan M 0158 CCT I;IV
Bosch N 42 AP 108 3.1, 3.2, 3.3
VW PV 1210
DIN EN ISO 60068-2-52 Severity 1…8
VW PV 3.15.3
Ford CETP 00.00-L-467
Renault D172028, ECC 134
GME 9540 P
SAE J 2334
GM 3172
Toyota TSH 1555 G, Meth. A,B,C
GMW 14872
Volvo STD 1027, 14,… 149, …1449
JASO M 610
Volvo STD 1027, 1375
Nissan M 0007 CCT I,II, IV
Volvo STD 423-0014
Corrosion Alternating Tests with controlled climate
Honda CCT 5100 Z-SGO-AOO
VDA 233-102
Hyundai/Kia MS 600-66 (CCT C)
Voest Alpine
KWT DC/PA PP PWT 3101
VW PV 1209
VDA 621-415 B
Corrosion Alternating Tests with controlled climate and freeze
DIN IEC 68-2-14 Nc (N42AP 221).
Air to liquid thermal shock test, Ice water shock test
ISO 16000-9
ISO12219-4
VDA 276-2
ASTM D6007-02
PV 3943
Emission test chamber, Static tests without carrier gas exchange, dynamic tests with carrier gas exchange
IEC-60068-2-14, Test Na², transfer time < 10 sec
MIL-STD-810 G, Method 503.5
MIL-STD-883 J, Method 1010.8 Variants A,B,C,D (D³ for 300l shock chamber), F
JEDEC standard JESD22-A106B
MIL STD 810G, 503.5, MIL-STD 883J, Method 1010.8 Variants A, B, C, D, D3, JESD22-A106B, Thermal Shock Test
ATEX Directive 2014/34/EU
ISO 16000-9 (April 2008)
ISO 10580 (October 2010)
EN 717-1 (January 2005), part 1
prEN 13419-1 (January 2003)
prEN 15052 (October 2004)
ISO/DIS 12219-4 (December 2011)
VDA 276-2 (December 2005)
PV 3943 (December 2000)
ASTM D 6330-98 (January 1999)
ASTM D 6007-02 (June 2002)
Cal Spec. 03150 (February 2010)
HJ 571-2010 (2010)
GEV test method (November 2001)
IOS-MAT-0010 (May 2007)”
ATEX, explosion protection
Emission test chamber
DIN EN 1539
dryer for flammable substances, oven for flammable substances, dryer
for combustible substances, oven for combustible substances