Test Standard
Test Standard Description
Weiss Technik Chamber Solution
2006/42/EC
CE Compliant, CE Certified
AHAM HRF
American Home Appliance Testing AHAM
ASTM B117-97
ASTM B117
ASTM D5116 VOC – materials/products
ASTM D5116
BMW PR303.5
BMW PR303.5 climate test trim parts
BMW PR306.5
BMW PR306.5 solar test trim parts
BMW PR308.2
BMW PR308.2 test bonded joints
DIN 75 220
Ageing Automobile Components in Solar Simulation Units
EN 60204-1:2006/AC: 2010
CE Compliant, CE Certified
EN 61010-1
CE Compliant, CE Certified
GMW14319, Temperature Cycle Profile for Vibration
GMW14319
GMW14785 PVT Cycle Test
GMW14785 pressure vibration test
GMW3172 Electrical Component Testing
GMW3172 electronic testing
IEC 60068-2-14, Test Na2
IEC 60068-2-14
ISO 12097-2
ISO 12097-2 Road Vehicles – Airbag Modules
ISO 12219-1 VOC-Whole vehicle
ISO 12219-1 VOC
ISO 12219-4 VOC-Small chamber method
ISO 12219-4 VOC-Small chamber method
ISTA Series
ISTA Packaging Testing
Fiat Chrysler LP.7N029
LP.7N029 Door Trim Panel Assembly Heat Age Exposure Test
Military Standard 202, method 107
Mil Std 202
Military Standard 810G, method 503
Mil Std 810
Military Standard 810G, method 509.5
Mil Std 810
Military Standard 883J, 1010.8, ver. A, B, C, D, F
Mil Std 883
Military Standard 883J, 1011.9, ver. A, B, C
Mil Std 883
NFPA 79:2015
NFPA 79
Nissan NES M0131
NES M0131 High Temp testing passenger parts
Nissan NES M0132
NES M0132 Thermal cycle test plastic parts, “NTC-1-5A”
SAE J575 AUG2015
“J575”, “Dust exposure test”, “J575 4.12”
SEMI S2-0715
SEMI S2, SEMI S8, SEMI S14
VDA 276 VOC-1m3 Test method
VDA 276
Volkswagen PV 1200
VW PV1200
Volkswagen PV 2005 Variant A
VW PV2005
Volkswagen PV 2005 Variant B
VW PV2005
EUCAR Hazard Levels
EUCAR Hazard Levels
EN 60068-2-60
Corrosive Gas Testing, low corrosive gas concentrations, mixed gas test, low gas ppb concentration test,
EN 60068-2-42
Corrosive Gas Testing
EN 60068-2-43
Corrosive Gas Testing
EMC
EMC Electromagnetic Compatibility
VW 80000 LV 124 K15
Condensation Test
Condensation Test
Condensation Test
Daimler MBN LV 124-2 K15
Condensation Test
VW PV 1200 (10/2004)
VW PV 1200 (10/2004)
BMW PR 308.2 (04/2006)
BMW PR 308.2 (04/2006)
VW PV 1200 Variant A (09/2000)
VW PV 1200 Variant A (09/2000)
VW PV 2005 Variant A (09/2000)
VW PV 2005 Variant A (09/2000)
DIN 72300-4 and ISO 16750-4 5.4.2 Water Shock
Water Shock, air/ice water test, Thermal shock test cabinet for air/ice water tests, Splash water test
EN ISO 6988 (DIN 50 018)
SO2 gas dosing
DIN 50 014-5
Direct spraying of brine, automatic operation
VOLVO STD 1027, 1375
Direct spraying of brine, automatic operation
Salt Spray, SC-IU
VOLVO STD 1027, 14
Direct spraying of brine, automatic operation
Salt Spray, SC-IU
VOLVO VCS 1027, 149
Direct spraying of brine, automatic operation
Salt Spray, SC-IU
VOLVO STD 423-0014
Direct spraying of brine, automatic operation
Salt Spray, SC-IU
VOLVO VCS 1027, 1449
Direct spraying of brine, automatic operation
Salt Spray, SC-IU
Ford CETP: 00.00-L-467
Direct spraying of brine, automatic operation
Salt Spray, SC-IU
RENAULT D17 2028/–C (2007), Test ECC1
RENAULT D17 2028/–C (2007), Test ECC1
Salt Spray, SC-IU
DIN EN ISO 6270-2 test CH, AHT
Condensed water test
Ozone
Ozone test
IEC 68268, EN 60529 LC1
Dust
MIL-STD 810G, Method 510.5
Dust
DIN EN 60529 September 2000
Spray Water Testing, Spray Splash Water Test, IP Test, IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX6K, IPX9K
JIS D 0203-1994
JIS D 0203-1994
Weathering tests:
DIN EN ISO 4892-3, procedure A (lamp combination)
cycle number 3+4
DIN EN 12224
VDI 3958 page 12
DIN EN 1297
EOTA TR-010
NF T 30-049 *
NF P 84-402 *
Acid precipitations:
ADF (Acid Dew and Fog) VDI 3958 page 12) *1
AR (Acid Rain) VDI 3958, page 12
DIN 55663 draft
Weathering test chamber, ADF test, acid dew and fog text, AR test, acid rain test
Low-temperature tests
IEC 60068-2-1, Test A
High-temperature tests
IEC 60068-2-2, Test B
Alternating temperature tests
IEC 60068-2-14, Test Nb
Constant Climates
IEC 60068-2-67
IEC 60068-2-78
Solar simulation tests
MIL-STD-810 G, Meth. 505.5 Procedure II
DIN 75220
PV 1211
PR 306.4
Solar simulation test chamber
EN 1539
EN 1539
DIN EN ISO 20857/2013, ISO 7, ISO 5
DIN EN ISO 20857/2013, ISO 7, ISO 5
DIN EN ISO 9227: 2012-09
DIN EN ISO 9227: 2012-09
DIN EN ISO 9227: 2015-09
DIN EN ISO 9227: 2015-09
DIN EN ISO 6270-2: 2005-09
Condensation Test
ASTM G 85, A2, A3, A5
Nissan M 0158 CCT I;IV
Bosch N 42 AP 108 3.1, 3.2, 3.3
VW PV 1210
DIN EN ISO 60068-2-52 Severity 1…8
VW PV 3.15.3
Ford CETP 00.00-L-467
Renault D172028, ECC 134
GME 9540 P
SAE J 2334
GM 3172
Toyota TSH 1555 G, Meth. A,B,C
GMW 14872
Volvo STD 1027, 14,… 149, …1449
JASO M 610
Volvo STD 1027, 1375
Nissan M 0007 CCT I,II, IV
Volvo STD 423-0014
Corrosion Alternating Tests with controlled climate
Honda CCT 5100 Z-SGO-AOO
VDA 233-102
Hyundai/Kia MS 600-66 (CCT C)
Voest Alpine
KWT DC/PA PP PWT 3101
VW PV 1209
VDA 621-415 B
Corrosion Alternating Tests with controlled climate and freeze
DIN IEC 68-2-14 Nc (N42AP 221).
Air to liquid thermal shock test, Ice water shock test
DIN EN ISO 12460-3
DIN EN ISO 12460-3, CARB, FAPE, formaldEhyde test
EN 717-1
ASTM D 6007
VOC: ISO 16000-9
Formaldehyde test, emission test chamber
ISO 16000-9
ISO12219-4
VDA 276-2
ASTM D6007-02
PV 3943
Emission test chamber, Static tests without carrier gas exchange, dynamic tests with carrier gas exchange
SHED, HC Emissions
SHED, HC Emissions
IEC-60068-2-14, Test Na², transfer time < 10 sec
MIL-STD-810 G, Method 503.5
MIL-STD-883 J, Method 1010.8 Variants A,B,C,D (D³ for 300l shock chamber), F
JEDEC standard JESD22-A106B
MIL STD 810G, 503.5, MIL-STD 883J, Method 1010.8 Variants A, B, C, D, D3, JESD22-A106B, Thermal Shock Test
ATEX Directive 2014/34/EU
ISO 16000-9 (April 2008)
ISO 10580 (October 2010)
EN 717-1 (January 2005), part 1
prEN 13419-1 (January 2003)
prEN 15052 (October 2004)
ISO/DIS 12219-4 (December 2011)
VDA 276-2 (December 2005)
PV 3943 (December 2000)
ASTM D 6330-98 (January 1999)
ASTM D 6007-02 (June 2002)
Cal Spec. 03150 (February 2010)
HJ 571-2010 (2010)
GEV test method (November 2001)
IOS-MAT-0010 (May 2007)”
ATEX, explosion protection
Emission test chamber
DIN EN 1539
Dryer for flammable substances, oven for flammable substances, dryer for combustible substances, oven for combustible substances
ATEX Oven
Explosion-Proof Drying Oven, ATEX oven
Test Standard
Test Category
Test Description
Temperature & Humidity
Weiss Technik Chamber Solution
ASTM D4322 / ISO 2233
Package testing of pharma/medical product
Condition 1 (cryogenic, special atmosphere)
-55 C., uncontrolled RH
ASTM D4322 / ISO 2233
Package testing of pharma/medical product
Condition 2 (preferred atmosphere
-35 C., uncontrolled RH
ISTA 2A, 3A
Package testing of pharma/medical product
-29 C., uncontrolled RH
ASTM D4332 / ISO 2233 / ISTA 2A,3A
Package testing of pharma/medical product
Condition 3 (frozen food, special atmosphere), Severe
cold
-18 C., uncontrolled RH
ASTM D4332 / ISO 2233 / ISTA 2A,3A
Package testing of pharma/medical product
Condition 4 (refrigerated storage, special atmosphere)
5 C., uncontrolled RH
ASTM D4332 / ISO 2233
Package testing of pharma/medical product
Condition 5 (preferred atmosphere)
20 C., 65% RH
ASTM D4332 / ISO 2233
Package testing of pharma/medical product
Condition 6 (temperature high humidity, special
atmosphere)
20 C., 90% RH
ISO 2233 / ISTA 2A,3A
Package testing of pharma/medical product
Condition 7 (controlled conditions)
23 C., 50% RH
ASTM D4332 / ISO 2233
Package testing of pharma/medical product
Condition 8 (preferred atmosphere)
30 C., 85% RH
ASTM D4332 / ISO 2233
Package testing of pharma/medical product
Condition 9 (preferred atmosphere)
30 C., 90% RH
ISTA 2A, 3A
Package testing of pharma/medical product
Hot/humid then heat/moderate RH
38 C., 85% RH
ISTA 2A, 3A
Package testing of pharma/medical product
Hot/humid then heat/moderate RH
60 C., 30% RH
Pharma / Lab Event – L / ENDH
ASTM D4332 / ISO 2233
Package testing of pharma/medical product
Condition 10 (preferred atmosphere)
40 C., uncontrolled RH
ASTM D4332 / ISO 2233
Package testing of pharma/medical product
Condition 11 (tropical, special atmosphere)
40 C., 90% RH
Pharma / Pharma-L /
Lab Event – L / ENDH
ISTA 2A, 3A, 4AB
Package testing of pharma/medical product
Desert and Hot/dry
50 C., uncontrolled RH
50 C., 25% RH
ASTM D4332 / ISO 2233
Package testing of pharma/medical product
Condition 12 (preferred atmosphere)
55 C., 30% RH
Pharma / Lab Event – L / ENDH
ASTM D4332 / ISTA 2A, 3A
Package testing of pharma/medical product
Desert (special atmosphere) / Extreme heat, Dry
60 C., 15% RH
Pharma / Lab Event – L / ENDH
USP 670
Packaging development
Moisture adsorption at dry conditions
25 C., 40% RH
Pharma / Pharma-L /
Lab Event – L / ENDH
USP 670
Packaging development
Moisture adsorption at humid conditions
25 C., 80% RH
Pharma / Pharma-L /
Lab Event – L / ENDH
TAPPI T 402
Stability testing of pulp and paper product
Conditioning and Testing atmospheres
23 C., 50% RH
Pharma / Pharma-L /
Lab Event – L / ENDH
ASAP test protocol
Accelerated pharma stability testing
Accelerated testing conditions, point 1
50 C., 75% RH
Pharma / Pharma-L /
Lab Event – L / ENDH
ASAP test protocol
Accelerated pharma stability testing
Accelerated testing conditions, point 2
60 C., 40% RH
Pharma / Lab Event – L / ENDH
ASAP test protocol
Accelerated pharma stability testing
Accelerated testing conditions, point 3
70 C., 5% RH
Pharma / Lab Event – L / ENDH
ASAP test protocol
Accelerated pharma stability testing
Accelerated testing conditions, point 4
70 C., 75% RH
Pharma / Lab Event – L / ENDH
ASAP test protocol
Accelerated pharma stability testing
Accelerated testing conditions, point 5
80 C., 40% RH
ICH Q1A
Standard pharma stability testing
Stability testing, long term storage
25 C., 60% RH
Pharma / Pharma-L /
Lab Event – L / ENDH
ICH Q1A
Standard pharma stability testing
Stability testing, long term storage
30 C., 65% RH
Pharma / Pharma-L /
Lab Event – L / ENDH
ICH Q1A
Standard pharma stability testing
Stability testing, intermediate term storage
30 C., 65% RH
Pharma / Pharma-L /
Lab Event – L / ENDH
ICH Q1A
Standard pharma stability testing
Stability testing, intermediate term storage
30 C., 75% RH
Pharma / Pharma-L /
Lab Event – L / ENDH
ICH Q1A
Standard pharma stability testing
Stability testing, accelerated storage
40 C., 75% RH
Pharma / Pharma-L /
Lab Event – L / ENDH
ICH Q1A
Standard pharma stability testing
Stability testing, long term refrigerator storage
5 C., uncontrolled RH
ICH Q1A
Standard pharma stability testing
Stability testing, accelerated refrigerator storage
25 C., 60% RH
Pharma / Pharma-L /
Lab Event – L / ENDH
ICH Q1A
Standard pharma stability testing
Stability testing, long term freezer storage
-20 C., uncontrolled RH
ICH Q1A
Standard pharma stability testing
Stability testing, long term semi-permeable container storage
25 C., 40% RH
Pharma / Pharma-L /
Lab Event – L / ENDH
ICH Q1A
Standard pharma stability testing
Stability testing, long term semi-permeable container storage
30 C., 35% RH
Pharma / Pharma-L /
Lab Event – L / ENDH
ICH Q1A
Standard pharma stability testing
Stability testing, intermediate semi-permeable container storage
30 C., 65% RH
Pharma / Pharma-L /
Lab Event – L / ENDH
ICH Q1A
Standard pharma stability testing
Stability testing, accelerated semi-permeable container
storage
40 C., 25% RH
Pharma / Pharma-L /
Lab Event – L / ENDH
ASTM D4169
Performance testing of shipping containers and systems
Environmental hazard testing per Assurance Level I
ASTM D4169
Performance testing of shipping containers and systems
Environmental hazard testing per Assurance Level II
ASTM F1980
Accelerated aging of sterile barrier system for medical devices
Accelerated aging test
Pharma / Pharma-L / Lab Event – T/500 / Lab Event – L / ENDH
ISO 11607
Packaging for terminally sterilized medical devices
Accelerated aging test
50 to 60 C., uncontrolled RH
Pharma / Pharma-L / Lab Event – T/500 / Lab Event – L / ENDH
International Federation of Societies of Cosmetic Chemists, IFSCC
Monograph #2: The Fundamentals of
Stability Testing
Standard cosmetic stability testing
Control Temperature
4 C., uncontrolled RH
International Federation of Societies of Cosmetic Chemists, IFSCC
Monograph #2: The Fundamentals of
Stability Testing
Standard cosmetic stability testing
Room Temperature
20-25 C., uncontrolled RH
Pharma / Pharma-L / Lab Event – T/500 / Lab Event – L / ENDH
International Federation of Societies of Cosmetic Chemists, IFSCC
Monograph #2: The Fundamentals of
Stability Testing
Standard cosmetic stability testing
Accelerated Testing
37 C., uncontrolled RH
Pharma / Pharma-L / Lab Event – T/500 / Lab Event – L / ENDH
International Federation of Societies of Cosmetic Chemists, IFSCC
Monograph #2: The Fundamentals of
Stability Testing
Standard cosmetic stability testing
Accelerated Testing
37 C., 80% RH
Pharma / Pharma-L /
Lab Event – L / ENDH
International Federation of Societies of Cosmetic Chemists, IFSCC
Monograph #2: The Fundamentals of
Stability Testing
Standard cosmetic stability testing
Accelerated Testing
45 C., uncontrolled RH
Pharma / Pharma-L / Lab Event – T/500 / Lab Event – L / ENDH
Cosmetic Regulation in a Competitive Environment,
Chapter 11: Stability
Testing of Cosmetic Products
Standard cosmetic stability testing
Room Testing
24 to 25 C., uncontrolled RH
Pharma / Pharma-L / Lab Event – T/500 / Lab Event – L / ENDH
Cosmetic Regulation in a Competitive Environment,
Chapter 11: Stability
Testing of Cosmetic Products
Standard cosmetic stability testing
Accelerated Testing
37 to 50 C., uncontrolled RH
Pharma / Pharma-L / Lab Event – T/500 / Lab Event – L / ENDH
Cosmetic Regulation in a Competitive Environment,
Chapter 11: Stability
Testing of Cosmetic Products
Standard cosmetic stability testing
Freeze-thaw cycling
Cosmetic Regulation in a Competitive Environment,
Chapter 11: Stability
Testing of Cosmetic Products
Standard cosmetic stability testing
Elevated Humidity
37 to 50 C., 80% RH
Pharma / Pharma-L / Lab Event – T/500 / ENDH
ICH Q1B
Standard cosmetic stability testing
Refrigerated conditions photostability testing, affects of light on product
5 C., unconrollted RH
ICH Q1B
Standard cosmetic stability testing
Stability conditions photostability testing, affects of light on product
25 to 40 C., 40 – 70% RH